.jpg&w=3840&q=75)
Sydney · NSW 2200
Ready-Mix Concrete Delivery in Bankstown NSW 2200
Find local suppliers and book your pour in 5 minutes
Bankstown has 5 nearby batching plants, with the closest approximately 3.9 km from the suburb centre. Check the delivered price and available delivery options for your pour date, then book online.
Closest plants for Bankstown NSW 2200
The nearest plants include Heidelberg Materials (Hanson) – Greenacre (3.9 km), Boral Concrete – Greenacre (4 km), and Holcim – Lidcombe (6.7 km). Straight-line distances are approximate; drive times vary with traffic and site access. Saturday availability depends on the plant — check live slots on MixHub for postcode 2200. All delivery fees shown in the table are indicative bands aligned with the Sydney hub page.
| Plant | Operator | Distance (approx.) | Zone | Est. delivery fee |
|---|---|---|---|---|
| Heidelberg Materials (Hanson) – Greenacre | Heidelberg Materials | 3.9 km | Close (within ~10 km) | $60–90 |
| Boral Concrete – Greenacre | Boral | 4 km | Close (within ~10 km) | $60–90 |
| Holcim – Lidcombe | Holcim | 6.7 km | Close (within ~10 km) | $60–90 |
| Hy-Tec (Adbri) – Silverwater (State Office) | Hy-Tec | 8.1 km | Close (within ~10 km) | $60–90 |
| Holcim – Moorebank (Liverpool) | Holcim | 8.8 km | Close (within ~10 km) | $60–90 |
Heidelberg Materials (Hanson) – Greenacre
Heidelberg Materials
Boral Concrete – Greenacre
Boral
Holcim – Lidcombe
Holcim
Hy-Tec (Adbri) – Silverwater (State Office)
Hy-Tec
Holcim – Moorebank (Liverpool)
Holcim
Ready to order concrete in Bankstown?
Check live availability for 2200.
Typical pours in Bankstown
| Project type | Typical volume | Notes for this area |
|---|---|---|
| Residential house slab | 18–32 m³ | Typical single and double-storey slabs near Bankstown use N25 or N32 based on engineer specification and soil class. |
| Driveway + crossover | 3–7 m³ | N25 at 100 mm is standard for vehicle areas; combine paths to reduce minimum-load surcharges where practical. |
| Commercial / industrial slab | 40–120 m³ | Larger pours often schedule off-peak delivery; N32–N40 common for warehouse and retail slabs. |
| Paths and patio | 2–5 m³ | Non-structural N20–N25 for garden paths; check short-load fees on very small orders. |
Residential house slab
18–32 m³
Typical single and double-storey slabs near Bankstown use N25 or N32 based on engineer specification and soil class.
Driveway + crossover
3–7 m³
N25 at 100 mm is standard for vehicle areas; combine paths to reduce minimum-load surcharges where practical.
Commercial / industrial slab
40–120 m³
Larger pours often schedule off-peak delivery; N32–N40 common for warehouse and retail slabs.
Paths and patio
2–5 m³
Non-structural N20–N25 for garden paths; check short-load fees on very small orders.
Access & site tips
Most Bankstown sites suit standard agitator trucks where street access allows reversing near the pour. Narrow blocks, rear yards, and busy arterials often need a line or boom pump — confirm standing zones and council conditions with your concreter before booking.
Mini-mix concrete delivery in Bankstown
Bankstown sites around Chapel Road, Stacey Street and the town-centre redevelopment zone often combine traffic, bus lanes and tight infill lots. Mini-mix is worth pricing for townhouse paths, driveway patches, small shed slabs and footing repairs where the load is low and the truck needs to avoid sitting too long in a busy residential or commercial street.
Typical mini-mix jobs in Bankstown
| Job | Volume | Typical grade |
|---|---|---|
| Shed slab / equipment pad | 1-2 m3 | N20-N25 |
| Driveway repair / patch | 0.5-1 m3 | N25 |
| Post holes / fence footings | 0.3-0.8 m3 | N20 |
| Garden path / edging | 0.5-1.5 m3 | N20 |
Grade pricing (Sydney bands)
Nearest plants are mostly in the close delivery band from this centroid. Indicative delivery fees often start around $60–90 per load — see live quotes for your site.
| Grade | MPa | Typical use | Indicative $/m³ |
|---|---|---|---|
| N20 | 20 MPa | Paths, garden edges, non-structural | $320–340 |
| N25Popular | 25 MPa | Driveways, residential slabs, paths | $340–370 |
| N32 | 32 MPa | House slabs, footings, structural elements | $370–400 |
| N40 | 40 MPa | High-load structural, suspended slabs | $400–440 |
| N50 | 50 MPa | Commercial / industrial structural | $440–490 |
N20
20 MPa
$320–340/m³
Paths, garden edges, non-structural
N40
40 MPa
$400–440/m³
High-load structural, suspended slabs
N50
50 MPa
$440–490/m³
Commercial / industrial structural
Compare national / Sydney pricing context — material rates exclude pump hire and site-specific surcharges.
Bankstown concrete delivery FAQs
Do you deliver concrete to 2200?
How quickly can I get concrete delivered to Bankstown?
Which concrete suppliers deliver to Bankstown?
What concrete grade do I need for a driveway in Bankstown?
Is Saturday concrete delivery available in Bankstown?
Also delivering near Bankstown
Concrete delivery pages for nearby suburbs using the same Sydney plant network.
Ready to price a pour?
Search live availability for your address — or return to the Sydney overview.