.jpg&w=3840&q=75)
Sydney · NSW 2557
Ready-Mix Concrete Delivery in Gregory Hills NSW 2557
Find local suppliers and book your pour in 5 minutes
Gregory Hills has 5 nearby batching plants, with the closest approximately 1.5 km from the suburb centre. Check the delivered price and available delivery options for your pour date, then book online.
Closest plants for Gregory Hills NSW 2557
The nearest plants include Hy-Tec (Adbri) – Smeaton Grange (1.5 km), Concrite – Smeaton Grange (2.3 km), and Holcim – Narellan (4.4 km). Straight-line distances are approximate; drive times vary with traffic and site access. Saturday availability depends on the plant — check live slots on MixHub for postcode 2557. All delivery fees shown in the table are indicative bands aligned with the Sydney hub page.
| Plant | Operator | Distance (approx.) | Zone | Est. delivery fee |
|---|---|---|---|---|
| Hy-Tec (Adbri) – Smeaton Grange | Hy-Tec | 1.5 km | Close (within ~10 km) | $60–90 |
| Concrite – Smeaton Grange | Concrite | 2.3 km | Close (within ~10 km) | $60–90 |
| Holcim – Narellan | Holcim | 4.4 km | Close (within ~10 km) | $60–90 |
| Gunlake Concrete – Prestons | Gunlake Concrete | 13 km | Standard (~10–15 km) | $90–130 |
| Hy-Tec (Adbri) – Prestons | Hy-Tec | 14.1 km | Standard (~10–15 km) | $90–130 |
Hy-Tec (Adbri) – Smeaton Grange
Hy-Tec
Concrite – Smeaton Grange
Concrite
Holcim – Narellan
Holcim
Gunlake Concrete – Prestons
Gunlake Concrete
Hy-Tec (Adbri) – Prestons
Hy-Tec
Ready to order concrete in Gregory Hills?
Check live availability for 2557.
Typical pours in Gregory Hills
| Project type | Typical volume | Notes for this area |
|---|---|---|
| House slab (greenfield) | 18–28 m³ | Newer release areas near Gregory Hills typically use N25 or N32 slabs on engineer-specified footing systems; confirm reactive soil class on your lot report. |
| Driveway + garage apron | 3–7 m³ | Compact lots often combine driveway, crossover, and paths in one pour. N25 at 100 mm is typical for residential vehicle areas. |
| Granny flat / secondary dwelling | 8–14 m³ | Secondary dwellings where permitted usually need a structural slab specification from your engineer; pump hire is common on tighter blocks. |
| Townhouse / duplex footing | 25–55 m³ | Medium-density sites near Gregory Hills often stage pours with boom pump access; follow the structural drawing mix grades (commonly N32). |
House slab (greenfield)
18–28 m³
Newer release areas near Gregory Hills typically use N25 or N32 slabs on engineer-specified footing systems; confirm reactive soil class on your lot report.
Driveway + garage apron
3–7 m³
Compact lots often combine driveway, crossover, and paths in one pour. N25 at 100 mm is typical for residential vehicle areas.
Granny flat / secondary dwelling
8–14 m³
Secondary dwellings where permitted usually need a structural slab specification from your engineer; pump hire is common on tighter blocks.
Townhouse / duplex footing
25–55 m³
Medium-density sites near Gregory Hills often stage pours with boom pump access; follow the structural drawing mix grades (commonly N32).
Access & site tips
Most Gregory Hills sites suit standard agitator trucks where street access allows reversing near the pour. Narrow blocks, rear yards, and busy arterials often need a line or boom pump — confirm standing zones and council conditions with your concreter before booking.
Mini-mix concrete delivery in Gregory Hills
Gregory Hills streets around Gregory Hills Drive and the industrial-commercial precinct are usually sealed, but active estate traffic and compact lots can crowd the pour area. Mini-mix is useful for driveway touch-ups, side paths, shopfront patches and small equipment pads where the load is under 2 m³ and truck standing must fit around builders and deliveries.
Typical mini-mix jobs in Gregory Hills
| Job | Volume | Typical grade |
|---|---|---|
| Shed slab / equipment pad | 1-2 m3 | N20-N25 |
| Driveway repair / patch | 0.5-1 m3 | N25 |
| Post holes / fence footings | 0.3-0.8 m3 | N20 |
| Garden path / edging | 0.5-1.5 m3 | N20 |
Grade pricing (Sydney bands)
Most listed plants fall in close-to-standard bands for this centroid. Indicative delivery fees typically sit in the $60–130 per load range before weekend or short-load surcharges — confirm on MixHub.
| Grade | MPa | Typical use | Indicative $/m³ |
|---|---|---|---|
| N20 | 20 MPa | Paths, garden edges, non-structural | $320–340 |
| N25Popular | 25 MPa | Driveways, residential slabs, paths | $340–370 |
| N32 | 32 MPa | House slabs, footings, structural elements | $370–400 |
| N40 | 40 MPa | High-load structural, suspended slabs | $400–440 |
| N50 | 50 MPa | Commercial / industrial structural | $440–490 |
N20
20 MPa
$320–340/m³
Paths, garden edges, non-structural
N40
40 MPa
$400–440/m³
High-load structural, suspended slabs
N50
50 MPa
$440–490/m³
Commercial / industrial structural
Compare national / Sydney pricing context — material rates exclude pump hire and site-specific surcharges.
Gregory Hills concrete delivery FAQs
Do you deliver concrete to 2557?
How quickly can I get concrete delivered to Gregory Hills?
Which concrete suppliers deliver to Gregory Hills?
What concrete grade do I need for a driveway in Gregory Hills?
Is Saturday concrete delivery available in Gregory Hills?
Also delivering near Gregory Hills
Concrete delivery pages for nearby suburbs using the same Sydney plant network.
Ready to price a pour?
Search live availability for your address — or return to the Sydney overview.