Concrete delivery in Liverpool — ready-mix truck pouring on site

Sydney · NSW 2170

Ready-Mix Concrete Delivery in Liverpool

Indicative plant distances, delivery zones, and grades — book online when your area is quotable.

Liverpool sits 2 km from the Holcim Moorebank plant and within 6 km of three more batching facilities. All five plants fall inside the standard delivery zone, keeping fees in the $80–120 range for this high-growth south-west hub.

Plants near Liverpool

Straight-line distances from geocoded suburb centroid to plant coordinates. Delivery fees are indicative bands aligned with the Sydney city page — confirm with live quotes.

Map showing concrete delivery plants near Liverpool
Approximate plant locations — not a drive-time isochrone.

Delivery to Liverpool

Most Liverpool pours dispatch from Holcim Moorebank on Regent Crescent, roughly 2 km south-east of the CBD, or from Advanced Readymix Cartwright and Hy-Tec Prestons (both under 5 km). Short haul distances mean trucks arrive with full slump retention, critical for the N32 and N40 grades common on Liverpool’s medium-density and commercial projects. Drivers typically reach the CBD via Moorebank Avenue and the Hume Highway, with the M5 Motorway providing a secondary route. During peak hours, Moorebank Avenue congestion around the intermodal precinct can add 10–15 minutes—schedule early-morning pours to avoid delays.

Holcim – Moorebank (Liverpool)

Holcim

2.2 km$60–90

Advanced Readymix – Cartwright

Advanced Readymix

4.2 km$60–90

Hy-Tec (Adbri) – Prestons

Hy-Tec

4.5 km$60–90

Gunlake Concrete – Prestons

Gunlake Concrete

5.9 km$60–90

Boral Concrete – Smithfield

Boral

8.2 km$60–90

Ready to order concrete in Liverpool?

Check live availability from plants near 2170.

Typical pours in Liverpool

Medium-density infill (townhouses & apartments)

40–120 m³

Liverpool CBD renewal is driving 10,000+ new apartments. N32 for raft slabs and suspended decks; multiple pours phased across build stages.

Commercial & mixed-use podiums

80–250 m³

New retail-residential towers around Macquarie Street and Bigge Street precincts. N40–N50 for structural cores; pump boom access needed on constrained CBD lots.

Hospital & institutional works

50–200 m³

Liverpool Hospital campus and Ingham Institute expansions require high-grade structural concrete with strict quality-assurance documentation.

Warehouse & logistics slabs

200–600 m³

Moorebank Intermodal Precinct warehousing (850,000 m² planned) uses N32 industrial-floor mixes with fibre reinforcement for heavy forklift traffic.

Residential driveways & paths

2–8 m³

Established streets south of the Georges River. N25 exposed aggregate is popular; check flood-affected lots for minimum slab height requirements.

Access & site tips

Liverpool CBD streets around Macquarie and George Streets are narrow with timed parking restrictions—book a Council permit for any kerb-side pour and confirm boom-pump swing clearance against overhead power lines. For sites near the Georges River, the NSW SES classifies Liverpool as severely flood-prone; confirm finished floor levels with your engineer before locking in a pour date. The Hume Highway and Moorebank Avenue carry heavy freight traffic from the intermodal precinct, so schedule deliveries before 6:30 am or after 9:30 am to avoid truck queuing delays.

Grade pricing (Sydney bands)

All five plants serving Liverpool fall within the standard delivery zone (under 20 km), so expect delivery fees of $80–120 per load on top of material cost. No outer-zone surcharges apply. Short-load fees (under 3–4 m³) may apply depending on the supplier—confirm when booking.

N20

20 MPa

$320–340/m³

Paths, garden edges, non-structural

N25

25 MPa

$340–370/m³

Driveways, residential slabs, paths

Popular

N32

32 MPa

$370–400/m³

House slabs, footings, structural elements

N40

40 MPa

$400–440/m³

High-load structural, suspended slabs

N50

50 MPa

$440–490/m³

Commercial / industrial structural

Compare national / Sydney pricing context — material rates exclude pump hire and site-specific surcharges.

Liverpool concrete delivery FAQs

How quickly can concrete be delivered to Liverpool?
The nearest plant, Holcim Moorebank, is roughly 2 km from Liverpool CBD. Under normal traffic a truck can arrive within 10–15 minutes of dispatch. Four additional plants sit within 6 km, giving strong same-day and next-day availability.
Does Georges River flooding affect concrete delivery in Liverpool?
Yes. The Georges River floodplain extends through Liverpool and the NSW SES classifies the area as severely flood-prone. During heavy rain events, road closures on Moorebank Avenue and low-lying streets can delay or prevent deliveries. Check Bureau of Meteorology flood warnings and confirm site access with your supplier before pouring.
What concrete grade do I need for a Liverpool driveway?
N25 (25 MPa) is the standard grade for residential driveways in Liverpool. If you expect heavy vehicle loading—common near the industrial areas south of the Hume Highway—step up to N32 with steel mesh reinforcement. All grades comply with AS 1379.
Are there parking or access restrictions for concrete trucks in Liverpool CBD?
Liverpool CBD has timed parking and clearway restrictions on major streets like Macquarie Street and George Street. You will likely need a Liverpool City Council road-occupancy permit for kerb-side pours. Confirm boom-pump reach against overhead power lines and allow extra time if your site is near the Hume Highway interchange.

Also delivering near Liverpool

Concrete delivery pages for nearby suburbs — same Sydney plants, similar pricing.

Ready to price a pour?

Search live availability for your address — or return to the Sydney overview.