.jpg&w=3840&q=75)
Sydney · NSW 2557
Ready-Mix Concrete Delivery in Gregory Hills
Compare suppliers and book your ready-mix concrete delivery online.
Gregory Hills is served by 5 batching plants within 15 km — nearest is Hy-Tec (1.5 km). Compare prices and book your pour online.
Plants near Gregory Hills
Straight-line distances from geocoded suburb centroid to plant coordinates. Delivery fees are indicative bands aligned with the Sydney city page — confirm with live quotes.
Delivery to Gregory Hills
The nearest plants include Hy-Tec (Adbri) – Smeaton Grange (1.5 km), Concrite – Smeaton Grange (2.3 km), and Holcim – Narellan (4.4 km). Straight-line distances are approximate; drive times vary with traffic and site access. Saturday availability depends on the plant — check live slots on MixHub for postcode 2557. All delivery fees shown in the table are indicative bands aligned with the Sydney hub page.
| Plant | Operator | Distance (approx.) | Zone | Est. delivery fee |
|---|---|---|---|---|
| Hy-Tec (Adbri) – Smeaton Grange | Hy-Tec | 1.5 km | Close (within ~10 km) | $60–90 |
| Concrite – Smeaton Grange | Concrite | 2.3 km | Close (within ~10 km) | $60–90 |
| Holcim – Narellan | Holcim | 4.4 km | Close (within ~10 km) | $60–90 |
| Gunlake Concrete – Prestons | Gunlake Concrete | 13 km | Standard (~10–15 km) | $90–130 |
| Hy-Tec (Adbri) – Prestons | Hy-Tec | 14.1 km | Standard (~10–15 km) | $90–130 |
Hy-Tec (Adbri) – Smeaton Grange
Hy-Tec
Concrite – Smeaton Grange
Concrite
Holcim – Narellan
Holcim
Gunlake Concrete – Prestons
Gunlake Concrete
Hy-Tec (Adbri) – Prestons
Hy-Tec
Ready to order concrete in Gregory Hills?
Check live availability from plants near 2557.
Typical pours in Gregory Hills
| Project type | Typical volume | Notes for this area |
|---|---|---|
| House slab (greenfield) | 18–28 m³ | Newer release areas near Gregory Hills typically use N25 or N32 slabs on engineer-specified footing systems; confirm reactive soil class on your lot report. |
| Driveway + garage apron | 3–7 m³ | Compact lots often combine driveway, crossover, and paths in one pour. N25 at 100 mm is typical for residential vehicle areas. |
| Granny flat / secondary dwelling | 8–14 m³ | Secondary dwellings where permitted usually need a structural slab specification from your engineer; pump hire is common on tighter blocks. |
| Townhouse / duplex footing | 25–55 m³ | Medium-density sites near Gregory Hills often stage pours with boom pump access; follow the structural drawing mix grades (commonly N32). |
House slab (greenfield)
18–28 m³
Newer release areas near Gregory Hills typically use N25 or N32 slabs on engineer-specified footing systems; confirm reactive soil class on your lot report.
Driveway + garage apron
3–7 m³
Compact lots often combine driveway, crossover, and paths in one pour. N25 at 100 mm is typical for residential vehicle areas.
Granny flat / secondary dwelling
8–14 m³
Secondary dwellings where permitted usually need a structural slab specification from your engineer; pump hire is common on tighter blocks.
Townhouse / duplex footing
25–55 m³
Medium-density sites near Gregory Hills often stage pours with boom pump access; follow the structural drawing mix grades (commonly N32).
Access & site tips
Most Gregory Hills sites suit standard agitator trucks where street access allows reversing near the pour. Narrow blocks, rear yards, and busy arterials often need a line or boom pump — confirm standing zones and council conditions with your concreter before booking.
Grade pricing (Sydney bands)
Most listed plants fall in close-to-standard bands for this centroid. Indicative delivery fees typically sit in the $60–130 per load range before weekend or short-load surcharges — confirm on MixHub.
| Grade | MPa | Typical use | Indicative $/m³ |
|---|---|---|---|
| N20 | 20 MPa | Paths, garden edges, non-structural | $320–340 |
| N25Popular | 25 MPa | Driveways, residential slabs, paths | $340–370 |
| N32 | 32 MPa | House slabs, footings, structural elements | $370–400 |
| N40 | 40 MPa | High-load structural, suspended slabs | $400–440 |
| N50 | 50 MPa | Commercial / industrial structural | $440–490 |
N20
20 MPa
$320–340/m³
Paths, garden edges, non-structural
N25
25 MPa
$340–370/m³
Driveways, residential slabs, paths
PopularN32
32 MPa
$370–400/m³
House slabs, footings, structural elements
N40
40 MPa
$400–440/m³
High-load structural, suspended slabs
N50
50 MPa
$440–490/m³
Commercial / industrial structural
Compare national / Sydney pricing context — material rates exclude pump hire and site-specific surcharges.
Gregory Hills concrete delivery FAQs
How quickly can I get concrete delivered to Gregory Hills?
Which concrete suppliers deliver to Gregory Hills?
What concrete grade do I need for a driveway in Gregory Hills?
Is Saturday concrete delivery available in Gregory Hills?
Also delivering near Gregory Hills
Concrete delivery pages for nearby suburbs — same Sydney plants, similar pricing.
Ready to price a pour?
Search live availability for your address — or return to the Sydney overview.